Diesel generator is an essential oil diesel generator when the things we want to notice how many oil timely, when using the new machine, we should pay special attention to, of course, sometimes have to do the necessary savings, so how to effectively save the oil?
When oil consumption is excessive, should first check the body and the gear chamber cover, wheel side of the market, back cover, cover the joint such as whether there is leakage. Should pay attention to observe the connection parts of the gasket is complete, to replace the damaged gasket. If the gasket is complete, should check the parts of the connection screw is loose. Loosen the bolt with wrench to the specified torque can be. If the above site is basically normal, and the oil spill in the position of the frame, to check the front shell oil, check the main parts in the oil and the shell side wheel on the same side of the base, because of screw loosening, line frame angle protection and shell in the oil belt under the pull wheel produces long-term collision, will form the ground through the shell oil the gap caused the oil spill.
Normal wear diesel generator engine to long-term use of, or because of improper maintenance of non normal wear, will cause the engine cylinder to form longitudinal stretch marks, bore, piston clearance exceeds the prescribed value, the supporting force of the piston ring is reduced, there scraping oil dirty phenomenon. Or because of the oil ring inside the inner support twist spring break in the open position of the oil ring, the oil scraping net in combustion, oil consumption caused by serious symptoms, is difficult to start the engine, the exhaust pipe has obvious blue smoke, serious respiratory injection. Furthermore, this should be on one side of the piston in the assembly, because the direction of inversion of the combustion chamber to form upside down state, although does not affect the starting of the diesel oil, but the loss will be very serious, daily fuel consumption of 0.5 kg.
How to make the machine more fuel-efficient energy saving?
1) to maintain the best oil supply angle: the angle deviation, will cause the oil time late, fuel consumption increased.
2) ensures no leakage: processing way is, the pad valve paint put on the polished glass plate, is the pipe joint. Adding diesel oil recovery device, plastic pipe can be connected with the back hollow screw nozzle on the tubing, the oil back into the tank.
3) to improve diesel engine cooling water temperature: the temperature increase can make a more complete combustion of diesel oil, the viscosity is small, can reduce the resistance movement, can achieve the effect of saving oil
4) increase the diesel engine pulley, improve operation speed in pump speed reduction under the condition of the flow and lift increase, to achieve the purpose of saving energy.
5) with oil before purification: the fault of diesel generator from more than half of the oil supply system. The processing method is to buy Diesel use precipitation 2-4 days before use, impurities precipitated 98%, such as are bought, in the tank filter placed at the two layers of toilet paper or silk.
6) adjust the injection pressure of fuel injector.
Believe that as long as do more than six energy-saving programs, diesel generator fuel consumption will be greatly reduced, and also can give full play to the power unit's work efficiency, reduce the cost of users.