Hotline:13606117335   Service No:0519-89881900   
    Current Location:Home - News Center - Industry news

    Diesel engine energy saving tips

    2021-10-25 | Pageviews: CHANGZHOU FOAN M AND E CORPORATION
    Article Tags:

    Increase the cooling water temperature of diesel engine

    The outlet water temperature of agricultural diesel engine is generally lower than 45 ℃, so that the diesel can not be completely burned, the oil viscosity is large, and the running resistance is increased. Therefore, it consumes more oil, so it is necessary to increase the temperature of diesel engine cooling water.

    Ensure the best fuel supply front angle

    Taking the most commonly used 195 diesel engine as an example, the best angle of fuel supply advance angle is 16-20 degrees. When the diesel engine is used for a period of time, due to wear, the fuel supply advance angle will be reduced, resulting in too late fuel supply time and greatly increased fuel consumption. Therefore, ensure that the oil supply angle is at the best angle.

    Ensure that the machine does not leak oil

    The oil delivery pipe of diesel engine often has loopholes due to uneven joint surface, deformation or damage of gasket. The solution is: coat the gasket with valve paint and grind it flat on the glass plate to correct the oil pipe joint.

    Add diesel recovery device

    The return pipe on the oil nozzle can be connected with the hollow screw with a plastic pipe to make the return oil flow into the oil tank.

    Clean the oil before use

    More than half of the faults of diesel engine come from the oil supply system. The solution is: put the purchased diesel oil aside for precipitation for 2-4 days before use, which can precipitate 98% of impurities; If you buy it now, you can put two layers of silk cloth or toilet paper at the refueling filter screen of the oil tank.
    Change the practice of "big horse pulling small car"
    "Big machine with small water pump" is often used in wells. It's actually a waste. Improvement method: appropriately increase the belt pulley of the diesel engine, increase the speed of the water pump when the diesel engine runs at a reduced speed, increase the flow and head, and achieve the purpose of energy saving.

    Adjust the injection pressure of the fuel injector

    The injection pressure of 195 diesel engine injector is 120 + 5kg / cm2. When the injection pressure is lower than 100 kg / cm2, the fuel consumption increases by 10-20 g / kWh. The pressure on the injection pump can be directly checked and adjusted by comparison method.

    Articles
      No related articles...
    Products
      No related products...
    Top